This is a transfer ONLY. You can choose either a sublimation or heat transfer vinyl transfer. 


Applies To:

• 100% cotton
• Poly/cotton blends
• 100% polyester
• Leather

Application Instruction:

• Mask with TTD Easy or TTD High Tack Mask (included in your package)
• Apply design at 300°F/149°C with medium pressure for 15 seconds
• Peel warm

*you may also use a home iron without steam slightly below the cotton setting. Cover the transfer with a thin fabric (for example, a bandana) and press without sliding the iron for 10-15 seconds. You may do this in section until the entire design has been pressed. Peel the carrier sheet and inspect the edges are fully fused to the fabric. If not, you may press again for 5 second increments.  



Before placing an order, please understand: 

1. This is for a sublimation transfer only. 
2. A heat press is needed to apply the transfer. A home iron will not work. 
3. Garment must be at a minimum 60% polyester and light colored. This will create a vintage look. For bold, bright colors, use a WHITE, 100% polyester shirt. 

As for the transfer itself, it is printed on premium paper using sublimation inks. Sublimation inks will bind to the polyester fiber when heat pressed. 


Heat press the transfer at 400 F for 45-55 seconds with medium pressure. Peel hot.
****PLEASE NOTE: Sublimation transfers are not able to print white ink. Whenever you see white on the design, it will show as the color of the shirt being used. So, if you want the white on the design to show up as white when pressed, you must use a white shirt.